- -5%
- New
- Out-of-Stock
- 5%
-
Top offers
-
Bikes
-
Helmets & Goggles
-
Accesories
Octane One Orbital Pro Singlespeed 10T - rear hub 32 holes red
Kč2,793
Kč2,940
Tax included
o1_hub_orbitalSSproRed
Octane One Orbital SS Pro
A premium MTB singlespeed hub with a 10t driver and wide flanges for great wheel strength. It runs on four high quality sealed bearings. We use a 10t driver that fit’s big strong bearings inside so everything runs smoothly without any bearing problems. The steel axle is cut flush with the nuts for a clean look and for safety reasons. Steel nuts give extra strength and clamping force for securing your wheel in horizontal dropouts. For weight reduction the cones have been made from aluminium. The looks are just as good as the function with black hardware and an anodized finish. Disc brake compatible. Hubs are offered in 32h version only and in a choice of four colors included new limited edition oil slick version...
Contact us!
Payment and Shipping
Octane One Orbital SS Pro
A premium MTB singlespeed hub with a 10t driver and wide flanges for great wheel strength. It runs on four high quality sealed bearings. We use a 10t driver that fit’s big strong bearings inside so everything runs smoothly without any bearing problems. The steel axle is cut flush with the nuts for a clean look and for safety reasons. Steel nuts give extra strength and clamping force for securing your wheel in horizontal dropouts. For weight reduction the cones have been made from aluminium. The looks are just as good as the function with black hardware and an anodized finish. Disc brake compatible. Hubs are offered in 32h version only and in a choice of four colors included new limited edition oil slick version.
MAIN FEATURES
material: AL6061-T6 body, AL7075-T6 axle and cones, steel bolts
female oversize axle system + side bolts – this solution rules as it’s light & strong!
4 x #6902 sealed bearings (2x main hub bearings, 2x inside driver)
bolts compatible with 10mm dropouts: 17mm hex head and 6mm Allen hex sockets, 3/8”x24tpi thread
hollow AL7075-T6 axle
10T driver with two decent sized, strong sealed bearings
3 pawls with 30 engagement points / each 12°
disc brake mount IS (International Standard / 6-bolts)
available in 32h version only
weight: 465 grams
Immediate Dispatch
Same day dispatch for orders placed before 12:00 PM
Shipping Options
Local Pickup - Prague 7
Pickup Point
Packeta (Zásilkovna) – Pickup PointsCZ – 65 Kč
SK – 91 Kč *
PPL ParcelShopCZ – 66 Kč
To Address
PPL – Home DeliveryCZ – 99 Kč
SK – 230 Kč *
Packeta (Zásilkovna) – Home DeliveryCZ – 109 Kč
SK – 145 Kč *
Other
International Delivery (outside CZ and SK)
Individual* Prices for Slovakia will be converted to EUR in the shopping cart based on the current exchange rate.
Delivery time is usually 2–3 business days.
Availability and Delivery Time
We always try to deliver your products as quickly as possible and at the lowest cost.
Payment Options
Standard Methods
Cash on Delivery Pay at the StoreOnline
Credit / Debit Card Online
Apple Pay
Google Pay
Online Bank Transfer
Bank Wire TransferInstallments
TWISTO Deferred Payment
Buy now, pay later
TWISTO Split into Thirds
Buy now, pay only a third
Google reviews 4.8 ★★★★★
Over 130 ratings from verified customers
What Our Customers Say
★★★★★
A great shop with a thoroughly professional yet human approach. I have been ordering from them for a long time and there has never been any problem. Communication works perfectly and you know where you stand right from the start.
Jakub Kváša – Google review
★★★★★
I now have my second Haro bike from Katmar Bike Center – this time an e-bike. Completely satisfied. Professional and helpful approach. I warmly recommend this shop.
Jaroslava Orgoň – Google review
★★★★★
Reliable. I bought a new chain, it turned out to be unsuitable, but exchanging it for another one was no problem.
Jan – Google review
Comments (0)
4 other products in the same category:
You might also like
Octane One Orbital SS Pro
A premium MTB singlespeed hub with a 10t driver and wide flanges for great wheel strength. It runs on four high quality sealed bearings. We use a 10t driver that fit’s big strong bearings inside so everything runs smoothly without any bearing problems. The steel axle is cut flush with the nuts for a clean look and for safety reasons. Steel nuts give extra strength and clamping force for securing your wheel in horizontal dropouts. For weight reduction the cones have been made from aluminium. The looks are just as good as the function with black hardware and an anodized finish. Disc brake compatible. Hubs are offered in 32h version only and in a choice of four colors included new limited edition oil slick version...